ON/OFF INPUT
SELECT VOLUME
WARNING

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOTEXPOSE THIS PROD-

UCT TO RAIN OR MOISTURE.

The PDP Manufacturing Process: Why colored dots may be present on the PDP

screen
The PDP (Plasma Display Panel) which is the display device of this product is composed of 0.9 to 2.2 mil-
lion cells. Afew cell defects will normally occur in the PDP manufacturing process. Several colored dots
visible on the screen should be acceptable. This also occurs in other PDP manufacturers' products and the
dots appearing does not mean that this PDP is defective. Thus a few cell defects are not sufficient cause
for the PDP to be exchanged or returned. Our production technology is designed to minimize cell defects.

Cooling Fan Noise

In the same way that a fan is used in a PC computer to keep the CPU (Central Processing Unit) cool, the
PDP is equipped with cooling fans to cool the Monitor and improve its reliability. Therefore, a certain level
of noise could occur while the fans are operating and cooling the PDP.
This noise doesn't have any negative effect on the PDP's efficiency or reliability. The noise from these fans
is normal during the operation of this product. We hope you understand that a certain level of noise from
the cooling fans is acceptable and is not sufficient cause for the PDP to be exchanged or returned.

Earth Wire (Ground Wire) should be connected.

(Please refer to Safety Instructions on page 6, Item 12. Power Cord Polarization)
- If the earth wire (ground wire) is not connected, there is possible a danger of electric shock caused by the
current leakage.
- If grounding methods are not possible, a separate circuit breaker should be employed and installed by a
qualified electrician.
- Do not connect ground wire to telephone wires, lightning rods or gas pipes.