Floor fixing option
4Bracket
Drill 3/8” (10 mm) fixing holes at the marked locations on the floor and insert the anchor. Install the washer and insert the hexagon screw into the bracket then tighten the screw. Position the toilet in the installed position. Install the sleeves, tighten the screw and attach the caps.
Anchor
Hexagon
Lag Screw
Bracket
Washer
Anchor
Hole
Cap
Sleeve
Screw
5Screw
Drill 5/16” (8 mm) mounting holes at the marked locations. Insert anchors into the holes. Place the toilet and align with anchoring holes position. Tighten screws and attach the bolt caps.
Fixing Holes | Screw Cap |
Screw
Anchor
Drill
Sleeve
4 | Kohler Co. |