INSTALLATION TO A
FREESTANDING BASE
6
Carefully turn the storage case over so the bottom of the storage case is facing up.
Place the base upside down onto the storage case.
Make sure that the edges of the back legs are flush with the back and sides of the storage case.
7
Insert screws into the holes in the corner brackets of the base.
Secure the base to the storage case.
Carefully turn the assembly right!side up and position where desired.
8
Verify that the storage case is level, both front!to!back and side!to!side. If the storage case is not level, adjust by turning the leveling feet as needed.
Make sure the storage case is supported by all four feet and does not rock.
Insert Screws Here
Leg
Foot
Leveling
Foot
Kohler o., Kohler, WI | 3 | 86216 2 |
