Kohler K-11343-GCR Technical Information, Required Electrical Service, Installation Notes, 1-7/8

ESCALETM

Optional Accessories (continued from Page 1)
K-9498	3″ (7.6 cm) whirlpool keypad trim	❑ CP	❑ Other_____

Technical Information

Fixture*:

Bathing well

Basin area	46-3/4″(118.7 cm) x 21-5/8″(54.9 cm)
Top area	69-15/16″(177.6 cm) x 34-3/8″(87.3 cm)
To overflow
Water depth			16-1/2″(42.1 cm)
Capacity			71 gal (268.8 L)
Weight			130 lbs (59 kg)
* Approximate measurements for comparison only.
Blower motor/control:
Hp	W	V		Hz	A
1	300	220-240		50/60	3
Included component:
Cut-out template					1054544-7

Required Electrical Service

Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage Circuit-Breaker (ELCB):

Blower motor/control 220-240 V, 15 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Floor support under bath must provide for a minimum of 1800 lbs (816.5 kg).

Hot water supply should be 70% of capacity or greater. Installations will vary.

This bath is designed for drop-in installation only. It is not suited for use in a three wall alcove with an overhead shower.

A blower motor/control access panel is required.

No change in measurements if connected with drain illustrated. (K-7214)

Blower/Control Access 30" (76.2 cm) W x 15" (38.1 cm) H

35-5/8" (90.5 cm)

35-5/8" (90.5 cm)

71-5/8" (181.9 cm)			1-7/8"
	3-1/2"	(8.9 cm)	(4.8 cm)

22-1/4"

(56.5 cm)

3" (7.6 cm) 2-7/8" (7.3 cm) 1-1/2" OD

Product Diagram

ESCALETM BUBBLEMASSAGETM BATH

Page 2 of 2

1054545-4-C