Kohler K-1418-H2 Technical Information, Required Electrical Service, Installation Notes, Memoirs

MEMOIRS®

Technical Information

Fixture*:

Basin area:

Bathing well			48″ (1219 mm) x 27″ (686 mm)
Top area			60″ (1524 mm) x 30″ (762 mm)
Weight			140 lbs (63.5 kg)
To overflow:
Water depth			16″ (406 mm)
Capacity			94 gal (355.8 L)
* Approximate measurements for comparison only.
Drop-in		70-1/2″(1791 mm) x 40-1/2″(1029 mm)
cut-out
Pump:	kW			V	Hz	A
Variable-	1.5			240	50/60	11
speed:

Required Electrical Service

Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD):

Pump/control 220/240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Floor support under whirlpool must provide for a minimum of 43 lbs/square foot (209 kg/square meter) loading.

Hot water supply should be 70% of capacity or greater. Installations will vary.

If installing a rim-mount faucet, make sure there is no interference with drain overflow and circulating system before drilling any holes. Consult local and national codes for minimum air gap requirements if installing a spout on the faucet deck.

This whirlpool is designed for drop-in installation only. It is not suited for use in a three-wall alcove with an overhead shower.

No change in measurements if connected with drain illustrated. (K-7161-AF or K-7161M-AF)

11-3/4"

(298 mm)

36" (914 mm) 5-1/4" (133 mm)

72" (1829 mm)

3" (76 mm)

20-1/8"

(511 mm)

Pump/Control

34" (864 mm) W x 15" (381 mm) H

42" (1067 mm)

22"

(559 mm)

1-1/16" (27 mm)

1-1/2" OD

3" (76 mm)

2-7/8" (73 mm)

Product Diagram

MEMOIRS® 6’ BATH WHIRLPOOL Page 2 of 2

1022383-4-D