13.You can select another program during operation by pressing the start/pause key first, then pressing the program key to the desired program, and pressing the pause/start key again to start the new program.
14.After washing, dishes should be allowed to cool down for about 15 minutes so they are not too hot to handle. Dishes will cool more quickly if the door is opened slightly.
15.After unloading the dishwasher, remove the filter, clean off any bits of food, and put the filter back into place.
NOTE: At the beginning of each cycle, the dishwasher always starts in the “drain” mode. This is because the drain pump always retains a small amount of water (in the sump) from the previous cycle. This is necessary to keep the pump primed. Therefore, do not be alarmed if you see a small amount of water being pumped out of the drain hose prior to the start of the regular wash cycle. This is normal.
Program Summary/Selection
Intensive Wash
Water Temperature: | Wash129/Rinse264rF |
Program Duration + Heating Time: 125minutes | |
Water Consumption: | 11 quarts |
Normal wash::
Water Temperature: | Wash125/Rinse152rF |
Program Duration + Heating Time: 130 minutes | |
Water Consumption: | 11 quarts |
Rapid wash:
Water Temperature: | Wash120/Rinse130rF |
Program Duration + Heating Time: 70minutes | |
Water Consumption: | 10 quarts |
Eco Wash:
Water Temperature: | Wash129/Rinse264rF |
Programme Duration + Heating Time: 120 minutes | |
Water Consumption: | 11 quarts |
Pre-Wash :
Water Temperature: | Incoming Water Supply |
Programme Duration Time: | 12 minutes |
Water Consumption: | 5.7 quarts |
(Note: the washing time may vary according to the incoming water temperature and the ambient temperature).
Technical Data and Troubleshooting
Technical data
Power input | 1160W |
Outer dimensions (HxWxD) | 17.1”x18.9"x22.5" |
Weight | 50 pounds |
Max. Water Consumption | 2.75 gallons |
Water pressure | 0.03~1MPa |
Controls | Digital |
Detergent dosage | 12g |
8