TABLE OF CONTENTS

 

PLANNING YOUR SYSTEM

3

WIRING CONNECTION

4

CONTROL FUNCTIONS

5, 6, 7

SPEAKER CONNECTION MONO CHANNEL

8, 9

2 CHANNEL

10, 11

4 CHANNEL

12, 13, 14

TROUBLE SHOOTING GUIDE

15

SPECIFICATION

16, 17

WARNING

18

PLANNING YOUR SYSTEM

Before beginning the installation, consider the following:

1. Do you plan to add additional mobile electronics equipment in the future?

If you plan to expand your system by adding other components sometime in the future, ensure adequate space is left and cooling requirements are met.

2. Should you use high or low level inputs?

Your Amplifier has been designed to accept Low-Level(Pre-Amp outputs from your radio) source signal. If your radio/source is equipped with Pre-Amp outputs, it is possible to utilize them to drive the Amplifier and the 2 front speakers. Then, use the built-in power of your radio to drive the 2 rear speakers.

3. Are your components matched?

The RMS power rating of your speaker(s) must be equal or greater than the RMS power rating of your amplifier. Your speaker(s) also must be 2 - 8 Ohms impedance for stable amplifier operation. Impedance information is normally printed on the speaker basket or magnet.

4. Where will the amplifier be installed?

Consider both the length of your leads, and routing when determining the mounting location. It is best to run power and RCA wiring on opposite sides of the vehicle to prevent induced noise. Pre-amp input jacks require a length of high quality shielded male to male RCA patch cord.

- 3 -

Page 5
Image 5
Kole Audio electronic PH4-1400, PH4-800, PH4-1000, PH2-2400, PH2-2000, PH2-1000, PH1-2000D, PH2-1500 manual Table of Contents

PH2-1500, PH1-2000D, PH2-2400, PH2-2000, PH4-1000 specifications

Kole Audio has built a strong reputation in the audio industry by providing high-performance equipment that fits the needs of both amateur and professional audio enthusiasts. Their line of electronic crossovers, specifically the PH2-1000, PH4-1400, PH4-800, PH4-1000, and PH2-2000, showcases innovative technology and robust features designed to enhance sound quality and provide versatility in audio setups.

The PH2-1000 is a versatile two-way crossover designed to deliver precise sound tuning. Its adjustable frequency settings allow users to customize the audio output according to their specific needs. Equipped with high-pass and low-pass filters, the PH2-1000 ensures that the right frequencies reach the appropriate speakers, significantly improving clarity and overall sound quality.

Moving to the PH4-1400, this four-way crossover is engineered for applications that require a wide frequency range and detailed sound separation. With variable crossover frequencies and individual adjustments for each output, the PH4-1400 provides unparalleled flexibility for complex audio systems. It also features high-quality components that minimize signal loss and distortion, making it an ideal choice for serious audiophiles.

The PH4-800 and PH4-1000 models also belong to the PH4 series, offering similar high-performance characteristics with slight variances in crossover frequencies and power-handling capabilities. These units are well-suited for both car audio and home audio systems, featuring low-pass, high-pass, and band-pass filters. Both models are designed to ensure seamless integration with subwoofers, midrange speakers, and tweeters, providing a balanced soundstage.

Last but not least, the PH2-2000 adds another layer of capability to Kole Audio's lineup. This two-way crossover features advanced circuitry that enhances signal integrity and minimizes phase issues, which can often plague audio systems. Its robust construction ensures durability, while the user-friendly interface allows for easy adjustments on the fly.

In summary, Kole Audio's electronic crossovers, including the PH2-1000, PH4-1400, PH4-800, PH4-1000, and PH2-2000, are reliable choices for achieving superior sound quality. With a variety of configurations and features tailored to meet the demands of different audio setups, these crossovers embody Kole Audio’s commitment to delivering high-quality audio products that cater to varied listening preferences.