KH 4063 / 4069 / 4070
Table lamp
1. Intended Use
This table lamp is meant to be used in dry areas and indoors.
It is not intended for outdoor use and not for use in commercial or industrial areas.
2. Technical Data
Operating voltage :
Light bulb : 60 W - E27: (Not included)
Maximum
power rating : 1 x 60 W
Protection class: II
To prevent fire hazards and the risk of injury:
•Never touch the table lamp or the lamp shade while it is switched on. Make sure that the table lamp is switched off and has cooled down, before you touch it.
•While setting up the table lamp, make sure that it is at a minimum distance of 0.5 meters from illumi- nated objects.
•Never cover the lamp shade, and allow air to circulate freely around and inside the table lamp.
•Always place the table lamp on an even surface. Otherwise, it might tip over and cause fire.
•Never leave the table lamp unsuper- vised when in operation.
3. Safety Instructions |
| 4. Operating elements |
|
|
|
To avoid |
| Fastening ring |
• Only connect the table lamp to a |
| Lamp shade |
power socket with a line voltage of |
| Lamp socket |
| Power cord with cord switch |
•Do not bend or squeeze the power cord.
•To disconnect, always pull out the plug at the power socket, do not pull at the power cord.
•Never use the table lamp in proximity of water or in damp cellar areas. Protect the table lamp from moisture and dirt.
•Before cleaning, or if there is a power supply fault, pull the plug out of the power socket.
•If the power cord is damaged, have it repaired by a qualified expert before using the table lamp again.
- 4 - |