Setting up the illuminated Figure
>Take the Illuminated Figure from its packaging.
>Remove all transportation fasteners and tapes/foils.
>Place the Illuminated Figure on a suitable surface.
>Carefully pull the two wire elements apart, on the Christmas tree figure (KH4222) and the Snowman figure (KH4220),
so that the figures can stand alone.
>If necessary, secure the illuminated figures to the ground with the supplied ground spikes.
>Connect the Illuminated Figure with a correctly installed 230 V domestic power wall socket.
>When you wish to turn off the illumina- tion function of the Illuminated Figure, remove the plug from the wall socket.
>During the periods in which the Illumi- nated Figure will not be in use, please store it in its packaging.
Cleaning and Care
Risk of potentially fatal electrical shock:
•First remove the plug from the power socket.
•NEVER submerse the Illuminated Figure in water or other fluids!
•Do not allow any liquids to permeate into the Illuminated Figure.
>Before you start cleaning it, allow the Illu- minated Figure to cool down if need be.
Cleaning the Rope Light:
>Clean the rope light with a lightly mois- tened cloth. NEVER use petrol, solvents or detergents that can damage plastics!
Maintenance
•The illuminated figure contains no parts that can be serviced by the consumer.
Disposal
Do not dispose of the device in your normal domestic waste.
This device is subject to the European Guidelines 2002/96/EC.
•Dispose of the appliance through an approved disposal centre or at your community waste facility.
•Observe the currently applicable regu- lations. In case of doubt contact your
disposal facility.
Dispose of all packaging materials in an environmentally friendly
manner.
- 3 -
