c) Adjusting the receiver volume
1* Using the slider on the receiver, you can adjust the receiver volume. There are two levels (MIN / MAX) available here.
yWith the receiver on the hook press
the button 
, to set the ringing volume to one of four levels.
d) Call waiting and transferring
You can put your incoming or
If your service provider or your PABX supports this function:
uPress the button R, to put a call on call waiting mode.
uPress the button R again to return from the call waiting to the present caller.
•You can simply put down the receiver when the caller to whom you wish to transfer the waiting call, acknowled- ges the call.
If your service provider does not support such a function and your phone is also not connected to a PABX:
gPress the 
button, if you wish to put the caller on an internal waiting
line of your telephones on waiting. Your caller will be presented with music while on hold, till you decide
to press the 
button.
tPress the 
buttons, to select from amonng the 16 tunes, while the
music is being played. A call waiting li- ne without music is the mute function. Here too the call is kept on waiting:
iPress the 
button, if you wish to disable or enable the microphone
during a call.
In this, you can hear the caller but he cannot hear you.
e)Making a phone call
To make outgoing calls,...
•Pick up the receiver and dial the number or
aPress the button 
when the recei- ver is on the hook. With this the
•You can also dial the number first and then pick up the receiver or
press the 
button. The number is dialled automatically.
f) Dialling with Local Code
To dial a call number from the memory with prefixed Local Code, first the requi- red number must be displayed.
2^ For example, press the 
button and search for the desired number in the Phone Book (see also Section 9n).
sPress the 
button twice. Instantly, the call number will be dialled along
with the prefixed Local Code.
- 11 - |
