For each cup of strong filter coffee, you will need approx. one level measu- ring spoon (supplied) of ground coffee. If you prefer a weaker taste, you can reduce the amount of ground coffee per cup.
➪Close the filter holder.
Filling with water
➪Open the water container lid (Figure A; ).
➪Fill the glass jug with tap water.
➪Fill the water container with the correct volume of tap water for the required number of cups to the water level indicator.
Starting the brewing process
➪Select an aroma setting in line with
the required number of cups (Figure D; ).
The corresponding LED illuminates and the brewing process begins.
WARNING: The lid of the water contai- ner becomes hot during the brewing process. Allow the device to cool befo- re starting another brewing process.
Setting the start of brewing
You can use the “prog” button (Figure D; ) to set the coffee machine to start brewing at a certain time. First, always fill the coffee machine with water and ground coffee and place the glass jug onto the hot plate.
➪Press and hold the “prog” button.
➪Program the desired start time using the “h” and “min” buttons (“Setting the time”)
Activating automatic start of brewing
➪Press the “auto” button (Figure D; ), until the LED illuminates.
➪Now select the desired number of cups
(“Starting the brewing process”)
➪The brewing process starts at the programmed time.
➪If you want to deactivate automatic
start of brewing again, press the “off” button (Figure D; ).
Switching-off and winding up power cord
➪When you want to switch off the coffee machine, press the “off” but- ton until all LEDs extinguish.
➪Now pull the plug from the mains socket.
➪Push the cable into its holder (Figure B) at the back of the appli- ance.
➪Push the metal contacts on the mains plug into the two holes above the cable holder as required.
Cleaning
To achieve the best possible brewing results, the coffee machine should be cleaned each time it is used.
➪Pull the plug from the mains socket.
6
