Kompernass KH 1112 manual Before the First Use, Fill in ground coffee

bifinett KH 1112

Operation

Before the First Use

IMPORTANT!

•Never fill more than a total of 1.3 litres of tap water into the water container. The minimum quantity in the water container and the minimum quantity of brewed coffee in the glass coffee-

pot is 250 ml. Otherwise the coffee maker could be damaged.

•Disconnect the coffee maker from the power supply immediately after use. The coffee maker is only fully current- less when you pull the plug out of the wall socket.

•Only pour tap water into the water container. Otherwise you may dama- ge the coffee maker.

• open the glass coffee-pot and the water contaier.

•Carefully rinse the water container and the glass coffee-pot with tap water.

•Fill the glass coffee-pot with max.

1.3 litres of tap water.

•Pour all the tap water into the water container (fig.C).

•Place the empty glass coffee-pot onto the hotplate.

•Switch the coffee maker on and wait until the coffee-making procedure has finished.

•Empty the glass coffee-pot.

•Switch the coffee maker off by pres-

sing the mains switch again , until the power on light goes out.

Then you can use the coffee maker to make fresh coffee.

Fill in ground coffee

• Swing out the filter holder (fig. D).

•Place an opened size 4 paper filter into the filter holder. (First fold the bottom filter paper edge over)

•Fill the ground coffee into the paper filter.

Allow approx. one level coffee mea- sure per small cup of ground coffee. For large cups, allow approx. one heaped coffee measure per cup. If the coffee is too strong, you can reduce the amount of ground coffee per cup to taste.

• Close the filter holder.

Fill water

•	Open the water container lid .
•	Fill the glass coffee-pot with tap
	water.

•Pour the tap water for the amount of coffee required into the water

container (fig.C).

• Close the water container lid .

- 6 -