Because the device is equipped with a heat maintenance function, the device automatically begins reheating as soon as the water tempe- rature falls below the set temperature.
The appliance heats until the desired tempera- ture is reached. Make sure that the appliance does not automatically switch on to the keep warm function. Therefore, do not leave the appliance unsupervised!
•As soon as the kettle u is lifted from the base t, the ON/OFF switch e jumps out and the operating lights r switch off.
•In order to halt the heating process, push the ON/OFF switch e up again. The operating light r goes out then as well.
Avoid setting the temperature regulator y in the transition range, as the water can start boi- ling on account of varying filling levels.
Warning: Pull the power plug from the socket before lifting the kettle u from the base t. This prevents any water splashing out from contacting the electrical connections in the base, which could cause a short circuit.
For safety reasons, the lid should not be opened while the water is boiling or is very hot. Otherwise there is a risk of injury.
Never submerse any parts of the device in water or other liquids! This can create the risk of a
Before cleaning the device, ....
•First pull the power plug out of the power socket and let the device cool completely.
•Clean the exterior surfaces and the power cord with a slighly damp cloth. Always dry the device well before using it again.
•Never use any cleansers, abbrasive substances or solvents. These can damage the device.
In the event of calcium deposits
•Purchase a decalcifying agent suitable for use with food containers from a household goods stores (e.g. coffee machine decalcifier).
•You can use a suitable product from a specialised dealer for the stainless steel container bottom.
Removing / replacing the spout screen
•Open the lid completely.
•Press down on the edge of the spout screen from above in order to remove it toward the inside.
•Clean the spout screen o with a lightly moistened wash cloth.
•After cleaning, insert the screen from above and press it firmly into place.
Cleaning and Care
Danger!: Do not open any part of the housing. There are no operating elements inside. An open housing can create the risk of a
Storage
Let the device cool completely before storing it.
•Wind the power cord around the holder on the bottom of the device.
•Store the device in a dry place.
- 6 -
