•When the desired browning has been obtained, press the button

Start/Stop until a signal tone is heard, the baking stops.

Note

Do not open the appliance lid during the baking process. The bread could collapse.

Tip: Check the consistency of the dough after a kneading phase of 5 minutes. It should have the consistency of a soft, sticky mass. If it is too dry, add some liquid to it. if it is too moist, add some flour (1/2 to 1 teaspoon one or more times, as needed).

Keeping warm

When the baking process is complete a signal tone sounds several times to signify that the bread or other food item can be removed.In the display appears „0:00“. At the same time there begins a keep warm period of one hour. Excluded are the programmes EXPRESS, CAKE, DOUGH and JAM.

End of the programme

Warning

Before you open the appliance lid , remove the plug from the wall socket. When not in use, always separate the appliance from the power source!

•On completion of the programme

remove the baking mould with the help of an oven cloth.

Warning

Always use oven cloths to remove the baking mould from the Bread Baking Machine.

• Place the baking mould upside down and, insofar as the bread does not immediately fall onto the grill, shift the knead drive back and forth a few times from below until the bread falls out.

Should one of the kneading hooks remain stuck in the bread, use the supplied knead- ing hook remover to dislodge it:

•Insert it into the round opening of

the kneading hook on the under- side of the still warm bread and jam the kneading hook remover against the lower edge of the kne- ading hook .

•Then carefully draw the kneading

hook

with the kneading hook

remover

upwards. Whilst doing

this one can see at which position in the bread the wing of the kneading hook is located.

•Lightly cut the bread at this position and then pull the kneading hook out.

Note

Do not use any metal objects which may cause scratches on the non-stick coating. Rinse the baking mould with warm water directly after removing the bread. This will help prevent the kneading hooks becoming stuck to the drive shaft.

Allow the bread to cool for 15-30 minutes before eating it.

Attention

Before cutting the bread always check to ensure that the kneading hooks have been removed from it.

Cleaning and Care

Warning

Before cleaning it, always remove the power plug from the wall socket and allow the appliance to cool down com- pletely.

Protect the appliance against splashing water and moisture, these could cause you to receive an electric shock.

Please observe the safety instructions also.

Important

The appliance and its ancillaries are not suitable for being cleaned in a dish washing machine.

Housing, lid, baking space

•Remove all residual matter in the baking space with a moist cloth or a lightly moistened soft sponge.

•Wipe also the housing and the lid, again only with a moist cloth or sponge. Ensure that the interior is completely dry.

Baking mould and kneading hooks

The surfaces of the baking mould and kneading hooks have been given an anti-stick coating. When cleaning them, do not use corrosive detergents, abrasive powders or objects that may cause scrat- ches on the surface.

Due to moisture and vapours the surfaces of various parts may undergo changes in their appearance over a period of time. This has no influence on the function nor does it reduce the quality of the baking results.

Before cleaning, remove the baking mould and the kneading hooks from the baking area. Wipe the exterior surfaces of the baking mould with a moist cloth.

Important

Never submerse the baking mould in water or other liquids.

Clean the interior areas of the baking mould with warm soapy water.

Should the kneading hooks be encrusted and it is difficult to dissolve, fill the baking mould with hot water for around 30 minutes.

Should the mountings in the kneading hooks be blocked, these can be care- fully cleaned with a wooden toothpick or similar.

Do not use chemical cleaning agents or solvents for cleaning the Bread Baking Machine.

Technical data

Model:

Bread Maker

 

KH 1170

Power supply:

230V~50Hz

Power consumption:

800 Watt



- 12 -

- 13 -



Page 7 Page 9
Page 8
Image 8
Kompernass KH 1170 manual Housing, lid, baking space, Baking mould and kneading hooks
Page 7 Page 9

KH 1170 specifications

The Kompernass KH 1170 is a versatile kitchen appliance that has garnered attention for its advanced features and user-friendly design. Ideal for culinary enthusiasts and busy home cooks alike, this device offers a range of functionalities that enhance meal preparation, making it a must-have in modern kitchens.

One of the standout features of the KH 1170 is its powerful motor, which provides robust performance for various tasks. Whether you're blending smoothies, chopping vegetables, or kneading dough, this appliance delivers consistent results with ease. The high-speed motor ensures that even the toughest ingredients are processed smoothly, making meal preparation faster and more efficient.

The KH 1170 comes equipped with multiple speed settings, allowing users to customize their cooking experience. This feature enables kitchen novices and experienced cooks to achieve the desired texture and consistency for different recipes. From gentle stirring to vigorous mixing, the appliance adapts to the specific requirements of each dish, ensuring optimal results every time.

Another noteworthy characteristic of the Kompernass KH 1170 is its compact design. Space-saving and lightweight, this appliance fits seamlessly into any kitchen, whether you have ample counter space or a cozy cooking nook. Its thoughtful design ensures that it can be easily stored away when not in use while remaining accessible for quick tasks.

The KH 1170 also boasts a variety of attachments that significantly extend its versatility. Included with the appliance are several blades and mixing tools, each tailored for different applications. This means users can switch between grinding spices, whipping cream, and blending soups with minimal hassle, making it a multifaceted addition to any culinary toolkit.

Safety is another crucial aspect of the KH 1170's design. It features non-slip feet for stability during use and a safety lock mechanism that prevents accidental operation when not in proper condition. This ensures a worry-free cooking experience, allowing users to focus solely on their culinary creations.

In terms of maintenance, the Kompernass KH 1170 is designed for easy cleaning. Many of its components are dishwasher-safe, while the smooth surfaces of the appliance allow for hassle-free wiping down after use. This convenience is particularly appreciated by those looking to streamline their kitchen tasks.

Overall, the Kompernass KH 1170 combines powerful performance, versatile functionalities, and a user-friendly design. Its multiple speed settings, various attachments, and safety features make it an indispensable tool in any modern kitchen, catering to the needs of both novice cooks and seasoned chefs alike.
Top Page Image Contents