CO Time
The CO Time (Continuous Operation Time) details how long an appliance can be operated without the motor
Inserting the threaded rod with pusher
1.Place the end of the threaded rod t in the motor unit r. Ensure that the pins inside the motor unit r engage with the guide rails on the threaded rod t.
2.Slide the threaded rod t with the pusher y as far as it will go into the motor unit r.
Appliance description
q Direction switch w Start switch
e Power cable with power plug r Motor unit
t Threaded rod
yPusher
u Container
i Nozzle adapter with seal o Nozzles
a Adapter lock s Lock ring d Motif discs
Before the first use
Take the Biscuit Shaper and all accessories from the packaging and remove all packaging material. Clean all of the components as described in the section „Cleaning and care“.
Assembling the container
Note:
The container u must be fitted, otherwise the Biscuit Shaper will not function!
1.Slide the container u over the pusher y such that the guide rails inside the container u enga- ge in the in notches on the pusher y.
2.Place the container u on the motor unit r so
that the arrow on the container u points to the
open lock | on the motor unit r. |
3.Turn the container u until the arrow on the
container points to the closed lock 
on the motor unit r.
4.Insert the power plug e into a wall socket.
5.Place the direction switch q onto the arrow pointing downwards .
6.Press and hold the start button w until the pusher y has returned itself to the MAX marking.
7.Remove the power plug e from the wall socket.
Assembling the Biscuit Shaper | Assembling motif discs | |
When the pusher y and container u are | ||
| assembled: | |
Note: | 1. | Select the desire motif disc d. |
2. | Place the motif disc d into the lock ring s. | |
Remove the power plug e from the wall socket be- | 3. | Place the lock ring s with the motif disc d onto |
fore assembling accessories. |
| the container u. |
| 4. | Turn the lock ring s in the direction of the arrow |
|
| until it engages . |
- 3 -
