•To clean the chewing surfaces, direct the rotating brush head with light pressure over the chewing surfaces.
•Finally, thoroughly clean the back parts of the molar teeth.
•On completion, press the Off switch e.
Note:
This appliance has a two minute timer. After two minutes the appliance becomes slower, indicating to you that the dental profession recom- mendation of two minutes has been complied with.
Important!:
In the beginning, it is common that the unfamiliar abrasion leads to bleeding of the gums. This is normal. Should this continue for more than two weeks, consult your dentist.
Fitting / removing brush heads
•You can remove the brush head q by twisting and pulling it upwards.
•To replace the brush head q use the inverse procedure.
The brush head q must engage on being put back in. To avoid damages, use only original brush heads.
(For replacement brush heads, see the order card)
Cleaning and care
After use, clean the brush heads thoroughly under running water. For hygienic reasons we recommend that every 2 - 4 weeks you clean the brush head with standard commercial cleaning fluids for dental prosthetics.
- 4 -
