- 4-
bifinett KH 1603
Tabletop grill KH 1603
Proper use
The device is intended for grilling foods
that are suitable for grilling.
Only original accessories are to be used –
and used as described. Any other use or
modification shall be deemed improper
use and could give rise to considerable
dangers.
The manufacturer will not accept liabili-
ty for loss or damage arising from im-
proper use. Not suitable for commercial
use.
Technical information
Mains voltage: 230 V ~ 50Hz
Nominal power: 1600 W
Important safety advice
To avoid danger to life from electric
shock:
• Do not operate the device if it has a
damaged mains lead or plug.
If the connection lead or device does
not work perfectly or is damaged,
have it examined and repaired imme-
diately at the service centre.
• The service centre for your country is
shown on the guarantee card.
• Before bringing into use and each
time after cleaning, check that the
connection contacts on the grill plate
are dry.
• Make sure that the mains lead cannot
touch any hot parts. Never use the de-
vice in the vicinity of open flames, a
hotplate or a hot oven.
• Do not place the device out in the
rain. Do not use it in a damp or wet
environment. Make sure that the
mains lead never gets wet during
operation.
To avoid a fire hazard and injuries:
• Never leave the appliance unattended
during operation.
• Never place the appliance underneath
cupboards or near curtains or other si-
milar easily flammable materials and
keep such materials away from the
appliance.
• Keep the appliance and the power
cord away from children. Children of-
ten underestimate the danger arising
from electrical appliances.
•Danger of burning! Allow the appli-
ance to cool down completely before
cleaning.
•Danger of burning! Only use the he-
at-insulated handles. The surfaces of
the appliance become very hot during
operation.
• Make sure the appliance is standing
firmly.
• Position the appliance near a wall
socket, if possible. Make sure that the
power plug is easily accessible in case
of danger and that no-one can trip
over the power cord.
• Protect the non-stick coating by not
using metal tools such as knives, forks
etc. If the non-stick coating is dama-
ged, do not continue to use the appli-
ance.
KH1603_IB_UK.qxd 09.01.2007 14:15 Uhr Seite 4