Appliance description | • Position the On/Off switch 5 at “On” |
| As soon as the appliance has reached its highest |
1 Hotplate | temperature the control lamp “Ready for use” 7 |
2 Power cable | glows. |
3 Connection socket | • Position the On/Off switch 5 at “O”. |
4 Grip | • First remove the plug from the wall power socket |
5 On/Off switch | and then the plug from the connection socket 3 |
6 Control lamp “Mains power connected” | on the appliance. The appliance is now inde- |
7 Control lamp “Ready for use” | pendant from mains power and retains its heat |
| for approx. one hour. |
First implementation
•Remove all packaging materials from the appliance and then clean it as described in the chapter “Cleaning and Care”.
•Place the appliance on a dry, flat and
•Warm the appliance up as described in the chapter “Utilisation”.
Note:
On the first usage, a slight odour can occur (minimal smoke development is also possible). This is normal and stops after a short time. Provide for sufficient ventilation. For example, open a window.
• Remove the plug from the wall power socket.
Risk of Burns!
Take hold of the food warmer ONLY by means of the grips 4 provided on it. The other appliance parts will be very hot!
•Place the food warmer at the place where you wish to use it.
Note:
You can also leave the appliance connected to mains power after it has been warmed up.
It could then happen that, during use, the control lamp “Ready for use” 7 briefly extinguishes itself and then glows once again. This indicates that the set temperature had fallen and the appliance had warmed itself back up.
Utilisation
•Place the appliance on a dry, flat and
•First insert the plug of the power cable 2 into the connection socket 3 and then connect the power cable 2 with a wall power socket. The control lamp “Mains power connected” 6 glows.
Cleaning and Care
Attention!
Before cleaning, ALWAYS remove the plug from the wall power socket! There is a risk of receiving an electric shock!
Allow the appliance to cool down completely before cleaning it. There is a danger of being burnt!
Do not use abrasive, aggressive or chemical cleaning agents. These could damage the upper surfaces of the appliance.
- 2 -