Do not submerge the blender or the hand mixer in water. If necessary, clean the lower part of the blender with the blade under running wa- ter. The
•Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department.
Risk of Injuries:
•During use, do not come into contact with the whisk, the kneading hooks or the knife on the blender. The blade of the blender is sharp.
Therefore, ALWAYS handle the blender with care. Do not allow long hair, scarves and such like to hang over the mixing attachments.
•NEVER attempt to assemble ancillaries with differing functions at the same time.
Risk of electrical shocks.
•The power cable must never come into close contact with hot parts of the appliance or other sources of heat. Do not allow the power cable to lie on sharp rims or edges.
•Do not fold or crush the power cable.
Description of Components
1 Speed switch
2 Fixture for the blender, with safety cover
3Power cable with power plug
4 Unlocking button for the handmixer
5 Unlocking button
6 Mixing stand
7 Mixing bowl
8 Filler opening
9 Lid
0 Turbo button q Ejection button w Blender
e Whisk made of stainless steel
r Kneading hooks made of stainless steel t Dough scraper
Unpacking
•Take all components out the packaging.
•Remove all packaging materials and transport restraints.
•Check that all of the items listed are present and that they do not show signs of damage.
Items supplied | Placing | ||
|
|
|
|
1 | Hand mixer | • Place the mixer stand 6 onto a level surface. | |
1 | Mixing stand |
| Three suction discs have been fixed to the base |
1 | Mixing bowl with lid |
| of the mixer stand 6 to prevent it sliding during |
2 | Kneading hooks |
| operation. |
2 | Whisks | • Ensure that the mains power socket is easily | |
1 | Blender |
| accessible in the event of a risk situation. |
1 | Dough scraper |
|
|
Operating instructions
- 3 -
