- 6-
Setting the time
If a subsequent button is not pressed within ten se-
conds, the kitchen radio defaults back into automa-
tic mode (the currently set time is displayed).
The radio must be off to set the time.
1. In automatic mode press the button MODE
SETTINGionce. The time blinks.
2. Press the buttons UP/DOWNsto set the time at
minute intervals. Pressing and holding the but-
tons changes the time at ten-minute intervals
Setting the date
1. In automatic mode press the button MODE
SETTINGitwice. The display shows
"01D01M2007Y", the date display blinks.
2. Press the buttons UP/DOWNsto set the date in
day intervals. Pressing and holding the buttons
changes the date at intervals of 10 days.
If a button is not pressed within 10 seconds, the
kitchen radio defaults back to automatic mode.
Setting the SDA
By means of the SDA (Special Day Alert) mode it is
possible to store certain days. You can activate up
to 6 dates. The kitchen radio then reminds you at 8
a.m.of the set day.
1. In automatic mode press the button MODE SET-
TINGithree times. Alternatively blinking in the
display are "SDA 1" and the current set date.
2. Press the buttons UP/DOWNsto set the date in
day intervals. Pressing and holding the buttons
changes the date at intervals of 10 days.
3. Press the button TIMERoto deactivate the year.
When you deactivate the year, the SDA alarm
will respond on the set date every year.
4. Press the button 1-6 rto programme in further
SDA alarms.
If a button is not pressed within 10 seconds, the
kitchen radio defaults back to automatic mode.
When the set date corresponds with the SDA
alarm...
• an acoustic signal is sounded at 8 a.m. for ten
minutes,
•"SDA" blinks on the display,
• the acoustic signal is repeated on the hour
every hour until 11 p.m.
If you wish to stop the SDA alarm, press any button.
Automatic Update (RDS)
The RDS signal transfers additional information such
as name of the station, time or song title to the radio.
With the assistance of the automatic update function,
the time display of your kitchen radio is automatically
updated upon reception of the RDS signal.
1. In automatic mode press the button MODE
SETTINGifour times.
On the display appears "UPDATE“.
2. Press the button UPsto activate the automatic
update function.
A clock symbol flashes in the upper left of the
display. The time is automatically updated
when the appliance is switched on and recep-
tion is made from a station transmitting an RDS-
Signal. The update is complete when the clock
symbol stops blinking and is displayed conti-
nuously.
3. Press the button DOWNsto deactivate the
automatic update function.
The clock symbol no longer appears.
Switching the dimmer on and off
The dimmer functions darkens the display, when no
actions are being taken.
1. In automatic mode press the button MODE SET-
TINGifive times. On the display appears
"DIM OFF".
2. Press the button UPsto activate the dimmer
function. On the display appears "DIM ON“.
IB_KH2289_E1548_LB3 30.01.2008 13:30 Uhr Seite 6