Kompernass KH 2400 manual Using the iron horizontally, Using the iron vertically, Setting the knob

KH2400

Steam ironing

Unwind the mains lead. Ensure that the iron is disconnected from the power sup- ply before you fill it with water. Turn steam regulator to the dry position (0 position) and the temperature control knob to MIN.

Fill the iron with water. Ensure that the MAX marking line is not exceeded. Con- nect the appliance to the mains power supply again. The blue shut-off indicator light in water tank comes on.

Set the temperature control knob to the steam position and the heating light will illuminate. In this setting, the iron can be used as a steam iron once the heating light goes out. The heating light will illuminate and go out regularly during ironing as an indi- cation that the temperature control is working properly.

Setting the knob

You can adjust the steam easily with the 7 positions of the steam control gear. Put the iron on the heel rest when rear- ranging clothing or while not in use. Steaming stops when the iron is placed on the heel rest.

Using the steam burst button

Be sure there is water in the tank	and
the temperature control knob	is on
steam.
Using the iron horizontally

Lift the iron and press the steam burst

button	. You may need to press this
button	a few times after filling the

iron with water to activate the pump. The burst steam facility can be used only when ironing at temperature of at least 150° C, this means form III to MAX.

Turn the steam control gear to the	Using the iron vertically
steam position and the iron will create
steam. Turn the steam control gear to
the position 0, and the steam will cease.
Steam adjustable

- 8 -