LED Camera Lamp KH 3350
Please read these operating instructions carefully before the first use of the appliance and keep them in a safe place for later reference. Pass these operating instructions on to whoever might acquire the appliance at a future date.
Intended use
This LED Camera Lamp is intended exclusively for non- commercial use as extra illumination in photo and video recordings.
Any other, or an additional, usage is considered as improper and can lead to damage. No liability/warranty will be granted for damages resulting from improper use or from unauthorized modifications of the appliance.
Safety Instructions
For safe handling of the device observe the following safety information:
This LED Camera Lamp uses Class 1 LEDs.
Do not look directly, unprotected or for a longer period in the light beam.
•Do not direct the beam of light directly into the eyes of other people or animals.
•Before use check the device for visible external damage. Do not take into use an appliance that is damaged or has been dropped.
•Arrange for a damaged unit to be replaced by Customer Services.
•Do not make any unauthorised modifications or changes to the unit.
•Protect the device from moisture and liquid penetration.
•Do not use the appliance adjacent to open flames.
Items supplied
LED Camera Lamp
2 x 1.5 V Batteries Type AAA/Micro/LR03 This operating manual
Check that all of the listed items supplied are present and do not show signs of damage.
In the event of an incomplete delivery or damage due to defective packaging or transport, contact the Service Hotline (see "Warranty and Service").
Inserting the batteries
To operate the LED Camera Lamp, 2 x 1.5V Batteries of the type AAA/Micro (supplied) are required.
•Open the battery compartment cover on the rear panel.
•Insert 2 AAA/Micro batteries into the battery compartment. Pay heed to the polarity markings shown in the battery compartment.
•Then close the battery compartment by replacing the cover and letting it snap into place.
Mounting the LED Lamp
The LED Camera Lamp can be screwed to a tripod with the ¼" thread or mounted with the knurled screw onto the camera accessory shoe.
Mounting onto a camera
Push the LED Camera Lamp to the stop in the camera accessory shoe and then secure it with the knurled screw.
Switching the LED lamp on and off
With the slide switch on the appliance top panel, you can turn the LED Camera Lamp on and off.
Storage
If you do not intend to use the appliance for a long time, remove the batteries and store it in a clean, dry place.
Disposal
Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Disposing of batteries
Do not dispose of batteries with household waste. Every consumer is statutorily obliged to dispose of batteries at a collection site of his community/city district or at a retail store. This obligation is intended to ensure that batteries are disposed of in an environmen- tally safe fashion. Only dispose of batteries when they are fully discharged.
Dispose of the packaging materials in an environmentally responsible manner.
Technical Data
Operating voltage: | 3 V DC (2 x 1.5 V Batteries |
| Type AAA/Micro/LR03) |
Operating duration: | approx. 2 h |
Dimensions |
|
( W x D x H ): | approx. 4 x 7 x 4.7 cm |
Weight: | approx. 40 g (without batteries) |
Operating temperature: | |
Colour temperature: | white (approx. 5500 Kelvin) |
Warranty and Service
You receive a
Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a
This appliance is intended solely for private, not commercial, use. If this product has been subjected to improper or inappropriate handling, abuse, or modifi- cations not carried out by one of our authorised sales and service outlets, the warranty will be considered void. Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs effected under warranty. This applies also to replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
Interaction with batteries
Danger exists from uses other than those intended!
• Do not throw batteries into a fire. |
• Never |
• Do not attempt to recharge batteries. |
• Regularly check the condition of the batteries. |
Leaking battery acid can cause permanent damage |
to the appliance. Special care should be taken |
when handling a damaged or leaking battery. |
Risk of acid burns! Wear protective gloves. |
• Store batteries in a place inaccessible to children. |
If swallowed seek immediate medical attention. |
• If you do not intend to use the appliance for an |
extended period, remove the batteries. |
Slide the switch to the "ON" position to turn the LED Camera Lamp on.
Slide the switch to the "OFF" position to turn the LED Camera Lamp off.
Cleaning
Important!
Ensure that no liquids can permeate into the interior of the LED Camera Lamp. It could cause irreparable damage to the appliance.
Clean the housing with a lightly moistened cloth.
Do not use abrasive or aggressive cleaning materials.
Notes on the EC Declaration of Conformity
This appliance fulfills, with regard to compliance with the essential requirements and other relevant regulations, the European Directive for Electro- magnetic Compatibility 2004/108/EC.
The complete original declaration of conformity can be obtained from the importer.
Importer
KOMPERNASS GMBH BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
ID no.:
3
- 1 - | - 2 - | - 3 - | - 4 - |