Kompernass KH 498 manual Operation, Wall mounting, Cleaning

Models: KH 498

1 8
Download 8 pages 61.8 Kb
Page 7
Image 7

Place the motor unit on the lid , ensuring that it clicks in audibly.

Note: The arrows on the motor unit and the accessory must stand one above the other .

Operation

Warning: Foodstuffs should not be too hot. Squirted-out contents may cause scalding.

Fire Danger: Never exceed the maxi- mum operating duration of 1 minute for soft foodstuffs, respectively, 15 seconds for solid foodstuffs. Allow the appliance to cool down for 2 minutes before switching it on again.

When you have assembled the hand blender for your particular purpose, place...

The plug in the mains socket.

Hold down the switch to process the foodstuffs at the standard speed.

Hold down the turbo-switch to process the foodstuffs at the higher speed.

When you have completed processing the foodstuffs, simply release the switch.

KH 498

Wall mounting

Included are 2 plugs and 2 screws to enable the wall bracket to be assem- bled. We recommend mounting the appliance close to a power point

Mark the position of drill holes using the appliance holder.

Insert the dowels into the drill holes.

Position the openings of the wall bracket over the bored holes, then fix it using both screws.

Cleaning

Danger of electrical shock! Before you clean the hand blender, unplug the appliance from the power socket. Under no circumstances may the motor unit be cleaned by immer- sing it in water or holding it under running water.

Danger of injuries! To prevent inju- ries, exercise caution when handling the extremely sharp blade .

Reassemble the liquidiser after use and cleaning to prevent injuries from exposed knife blades. Keep the blade out of the reach of children.

Attention! The attachments of the hand blender may not be cleaned in a dishwashing machine, this would damage them.

- 5 -



Page 7
Image 7
Kompernass KH 498 manual Operation, Wall mounting, Cleaning