8. Trimming beards and sideburns
➩Attach the blade attachment for side burns and beards as described in section 6.
➩Make sure that the blade attachment is correctly fastened before using the appliance.
➩Only then switch the hand unit on, using the
➩Direct the blade attachment over the skin without using excessive force. Thereby, hold the blade attachment vertically to the skin.
➩Switch the appliance off after use (switch to position "0").
9. Cleaning and care
➩Remove the fitted blade attachment from the hand unit and clean it under running water.
Important: The hand unit is only splashproof. NEVER submerse it in water.
➩Dry the blade attachment completely.
➩Clean off any hairs remaining on the attachment blades with the cleaning brush.
➩Periodically lubricate the blades on the attachments using the blade oil supplied.
➩Do not use cleaning agents or solvents. They can damage the plastic surfaces.
➩Keep the appliance in a cool dry place.
➩Remove the battery if you are not intending to use the appliance for a long period.
- 5 -
