- 10-

9.3 Connecting audio components via an analogue cable

If a digital input is not available on the audio component you can connect
the DVD player to it via conventional analogue cinch cables.
To connect the DVD player with analogue cables:
• Plug a cinch cable into each of the sockets FL(front left channel), FR
(front right channel), SL(rear left channel), SR (rear right channel), CENTER
(front centre channel) and SUBWOOFER(Bass) on the rear panel of the
DVD player.
• insert the cinch cables into the corresponding analogue inputs of the
audio component.
10. OSD menu settings
All possible settings on the DVD player can be administered with the remote
control via the so called "OnScreen display" menu (in short "OSD Menu").
The OSD Menu will be superimposed on the television screen.
Before you use the DVD player for the first time for playback of DVDs,
VCDs/S-VCDs or Audio-/MP3-CDs you must implement a few settings via
the OSD Menu. These settings are dependent amongst others on...
• the language, in which you want the OSD Menu to be displayed
• which TV standard corresponds to the television, to which you want to
connect the DVD player
• Which image format your television can display
Administering settings via the OSD menu
• First insert the connector plug of the DVD player's power cord into a
power socket.
• To switch on the DVD player press the POWERbutton on the front panel of
the DVD player. If the DVD player is already switched on but is in stand-
by mode, press the button STANDBYon the remote control to switch the
DVD player on. Standby mode is indicated by the green LED on the
front panel of the device.
The device will check to see if a disc is inserted. The SilverCrest logo appears
on the television screen:
If there is no disc inserted the notice NO DISC appears on the television
screen and NO DISCis shown in the display.
• Firstly please familiarize yourself with the OSD Menu's operation by
means of the following brief introduction.
IB_KH6517_18_DVDPlayer_LB6.qxd 23.01.2008 19:07 Uhr Seite 10