Preparing the facial sauna for use Utilisation
•Unwind the power cable 5 from the cable storage 8.
•Place the heating unit 9 on a level,
•Using the measuring cup 0, fill the water bowl with water. Orientate yourself to the scale on the measuring cup 0, for how long you wish to use the appliance (approx. 5, approx.10 or approx. 15 minutes). Use the scale that is appropriate to the respective steam setting (Hi or Lo).
Warning!
NEVER fill the water bowl with a water volume that exceeds the “Hi 15 min.” marking (in the measuring cup 0). Otherwise, the water could overflow and then permeate into the interior of the appliance. This could damage the appliance irreparably!
•Position the face mask 1 on the heating unit 9: The lugs on the underside of the face mask 1 must grasp the recesses on the heating unit 9. Then turn the face mask 1
•Insert the plug 5 into a wall power socket.
The Facial Sauna is now ready for use.
Attention!
This facial sauna may not be used if you suffer from one of the following ailments:
•with acarodermatitis
•with erythrodermia
•with swellings in the facial area
•with heart illnesses
•with diabetes
•wounds in the facial area
•with eczema
•with psoriasis
Should you be pregnant or have other health issues, consult your doctor before using the appliance.
Utilisation of the facial sauna prepares your skin admirably for further treatments, for example deep cleansing, moisture provision, face masks etc. The steam invigorates the skin, opens the pores and impurities can be better removed.
Operation
Prepare the facial sauna as described under “Preparing the facial sauna for use”.
•Press once on the LO/HI/OFF button 7. The control lamp 6 glows green. The water in the water bowl is heated just sufficiently to produce a small amount of steam.
For more steam, press on the LO/HI/OFF button 7 once more. The control lamp 6 glows red, the water is heated further and so produces more steam.
•Hold your face over the face mask 1. Close your eyes and relax.
- 3 -
