c) Erasing stored measurements
Once all the memory locations are occupied, the appliance automatically overwrites the oldest measure- ment. It is therefore not absolutely necessary to erase memory locations. However, you can erase all the memories completely by ...
•taking out the batteries and inserting them again after a few seconds.
Afterwards, using the MEMORY button, check whether any of the memory locations are still occupied, and if so, repeat the process.
8. Care and cleaning
•Carefully clean the equipment and pressure sleeve using a slightly damp cloth only.
•Do not use cleaning agents or solvents.
•Do not, in any circumstances, immerse the appliance in water, as this will penetrate through to the inside. This would cause damage to the appliance.
16
