www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

SETTING THE CUTTING DEPTH

Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the material thickness. This should help to ensure you achieve a clean cut.

Release the wing nut on the depth adjuster , set the required depth on the scale and retighten the wing nut.

SETTING THE CUTTING DISTANCE / PARALLEL GUIDE

Release the wing screw on the parallel guide , using the marking set it to the required cutting distance and retighten the wing screw.

STATEMENT OF CONFORMITY

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations:

Machinery Directive:

(98/37 EEC)

EU Low Voltage Directive:

(73/23 EEC), (93/68 EEC)

Electromagnetic compatibility:

(89/336 EEC), (93/68 EEC)

Description / Model type:

PARKSIDE CORDLESS CIRCULAR SAW PAHKS 18 V

Bochum, 31.08.2003

 

Hans Kompernaß

- Managing Director -

8

Page 8
Image 8
Kompernass PAHKS 18V Setting the Cutting Depth, Setting the Cutting Distance / Parallel Guide, Statement of Conformity