www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
PEBH 900 rotary percussion drill
for chiselling, hammering, drilling and screwing
Dear Customer,
We are delighted that you have decided to purchase our high quality PEBH 900 rotary percussion drill. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly.
Please read the operating instructions 
below and the accompanying safety advice carefully. Use the equipment only as described and for the indicated purposes. By doing this you will be able to work in complete safety and produce better results. We hope you enjoy using your drill.
FEATURES OF THE PEBH 900 |
|
Chuck | ON / OFF trigger |
Locking/unlocking cap | Speed control wheel |
Depth stop | Forward/reverse selector |
Function selector | Trigger lock button |
Ventilation slots | Auxiliary side handle |
TECHNICAL INFORMATION
Nominal power: | 900 | W | Sound pressure level: | Lp = 099,6 dB(A) |
Nominal voltage: | 230 | V ~ 50 Hz | Sound power level: | Lw = 112,6 dB(A) |
No load speed: | no 0 - 1.100 /min | Vibration: | 8,5 m/s2 | |
Blows per minute max.: | 0 - 5.800 /min |
|
| |
Max. hole diameter: | 24 mm in concrete |
|
| |
| 13 mm in steel |
|
| |
| 30 mm in wood |
|
| |
Protection class: | II |
|
|
|
Gewicht: | 3,3 kg | Wear ear defenders ! |
| |
IMPORTANT SAFETY ADVICE
To be read in conjunction with the advice in the accompanying booklet on safety before using for the first time.
To avoid causing damage and danger to life, before starting work check the surface you are about to drill (e.g. by using a metal detector/loca tor) for electrical cables, gas and water pipes.
On safety grounds, always use two hands when using the drill and keep a proper footing and balance. Make sure you always use the auxiliary side handle whilst operating the drill.
Look after your health: Wear ear defenders - also wear safety glasses and a breathing /dust mask. Always keep the power cable well out of the working area and fed to the rear of the machine.
The drill is not to be operated by persons under 16 years old.
4
