QTechnical information
Rated voltage: | 230 V ~ 50 Hz |
Nom. power input: | 710 W |
Nom. | n0 |
Blade stroke: | 28 mm |
Max. cutting width: | Wood 195 mm |
Protection class: | II / |
Noise and vibration data:
Values determined in accordance with EN 60745 The sound pressure level
Wear ear protection!
Evaluated acceleration, typical: Hand / arm vibration ah = 6,303 m / s2 Uncertainty K = 1,5 m / s2
Warning! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibra- tion levels and in many cases they may exceed the values given in these instructions. It is easy to underes- timate the vibration load if the electrical power tool is used regularly in particular circumstances.
Note: If you wish to make an accurate assessment of the vibration loads experienced during a particu- lar period of working, you should also take into ac- count the intervening periods of time when the de- vice is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.
Introduction / General safety advice
PFS 710 A KH 3189
230 V ~ 50 Hz · 710 W n0 500 - 2600
Date of manufacture:
Kompernaß GmbH · D- 44867 Bochum · www.kompernass.com
QGeneral safety advice
JAttention! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and/ or serious injury.
MAKE SURE THAT YOU KEEP THESE INSTRUC- TIONS AND SAFETY ADVICE IN A SAFE PLACE.
1. Your working area
a)Keep your working area clean and
b)Do not work with the device in potentially explosive en- vironments in which there
are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.
c)Keep children and other people away while you are operating the electrical tool. Distractions can
cause you to lose control of the device.
2. Electrical safety
a)The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock.
GB/IE/CY 7
