Introduction / Safety
Hot air gun PHLG 2000 SE
For removing, reshaping, preheating, defrosting etc.
LIntroduction
LFor your safety
Please make sure you familiarise yourself fully with the way the device works before
you use it for the first time and that you understand how to handle electrical power tools correctly. Further details can be found in the operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.
LProper use
The hot air gun is intended for the removal of paint, for warming (e.g.
Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. The device is not intended for commercial use.
LFeatures and equipment
QAir inlet
WON / OFF switch E Nozzle
R Heat shield
T Reflector nozzle Y Protector nozzle U Flat nozzle
I Reducer nozzle
LIncluded items / supplied accessories
1 Hot air gun PHLG 2000 SE
1 Reflector nozzle
1 Protector nozzle
1 Flat nozzle
1 Reducer nozzle
1 Operating instructions
1 Guarantee documentation
LTechnical information
Nominal voltage: | 230 V ~ 50 Hz |
Power consumption: | Setting 1: 1000 W |
| Setting 2: 2000 W |
Air flow approx.: | Setting 1: 300 l / min, |
| Setting 2: 500 l / min |
Temperature |
|
Nozzle outlet approx.: | Setting 1: 375°C, |
| Setting 2: 550°C |
Protection class: | II / & |
Sound pressure level: | 70 dB (A) |
The sound pressure level (A) of the device is typically less than 70 dB (A).
LSafety
Safety Information
Specific to this Device
JPlease ensure that only individuals over the age of 16 use the device in accordance with the operating instructions!
JPlease keep children away from the device. Store the device in a dry, closed room to which children do
not have access.
6 GB/IE