www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
PLP 180 SOLDERING GUN
Dear Customer! We are delighted that you have decided to purchase our high quality PLP 180 soldering gun. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools
correctly. Please read carefully through the following operating instructions 
and the following safety advice . Use the equipment only as described and for the indicated purposes. By doing this you will be able to work in complete safety and produce better results.
We hope you enjoy using your soldering gun.
PROPER USE
FEATURES OF THE PLP 180
Soldering tip
Fixing screw
Operation indicator / Illumination of the soldering area
Device handle
Device plug/cable
TECHNICAL DATA
Nominal voltage: | 230 | V | max. soldering |
|
Frequency: | 50 Hz | tip temperature: | 600° C | |
Rated consumption: | 180 | W | Ready for soldering after: | 5 sec |
Insulation class: | II |
| ON max. 12 sec. / OFF min. 48 sec. | |
Weight: | 1050 g | Bulb: | 6 V / 3 W | |
IMPORTANT SAFETY ADVICE
Before using your soldering gun for the first time please read the section "Working safely". Before every use check that the soldering gun is in proper operating condition; does the power supply match the requirements, is the solder about to run out or is it broken?
The size of the soldering tip must be suitable for the size of the soldered joint.
The soldering tip must be free of contaminants. A small wet sponge is ideal for cleaning it Make sure that the joint surfaces to be soldered are bright, clean metal. There must be no dirt and oxide coating present. If necessary clean the soldering site with alcohol.
The strength of the soldering site must be greater than the solder.
Use the general solder/ tin solder sparingly. Remember - a site that has been soldered before cannot be made free of solder residue.
This soldering gun is intended for home use only.
4
