SWITCHING ON AND OFF
When using the orbital sander you can select between continuous and
SWITCH ON | press ON/OFF switch . | |
SWITCH OFF | release ON/OFF switch . | |
SWITCH ON CONTINUOUS OPERATION: | press ON/OFF switch | and with it still pressed fix it in place |
| by pressing the continuous operation locking button . | |
SWITCH OFF CONTINUOUS OPERATION: | press on/off switch | and release it again. |
SETTING THE SPEED
You can set the required speed using the adjuster wheel (see Fig ) as required. As the setting depends on what kind of material you are working with, use the recommendations and examples given in Tips and Tricks.
FITTING THE SANDING SHEETS
| Note: before fitting a new sanding sheet, remove dust and dirt from the base . |
|
|
|
|
| ||||
|
|
|
|
|
| |||||
1. | Lift both clips | to open them to insert a new sanding sheet or change the sanding sheet for use on a different material. |
|
|
|
| ||||
2. | Push the sanding sheet | under the open clip at one end and clamp it securely on the base by moving the clip down again. |
|
|
|
| ||||
|
|
|
| |||||||
3. | Do the same at the other end. Make sure that the sanding sheet | is tight against the base. See Figures | and . | |||||||
4. | Important! - The holes in the sanding sheet | and the base | must align for the dust to be extracted through the base. See Figure . | |||||||
Different materials need different grades of sanding sheets. To determine which grade is suitable for your work, please read our recommendation in Tips and Tricks.
DUST EXTRACTION
• DUST EXTRACTION WITH PAPER DUST BAG
Push the paper dust bag on to the adapter . Ensure that the adapter fits correctly into the holder. Clip the dust bag with the adapter to the side of the sander.
• DUST EXTRACTION WITH VACUUM CLEANER
For dust extraction using a vacuum cleaner use the appropriate connector – see Figure . Attach the adapter to the end of the vacuum cleaner hose and clip it to the side of the equipment.
5
