or
and and
and
and
MUTE, TAPE RECORDER AND PROGRAMMING
and
Mute function
Switches off the microphone, and the red LEDs
are extinguished. Press again to switch on the
microphone.
Tape recorder outlet
An outlet for a tape recorder is provided on the
bottom of KonfTel 100 R. The outlet is designed
for a Tele 3.5 mm tape recorder connector.
Store speed dial numbers– KonfTel 100 R switched off
Press PRG to open the memory.
Enter the desired telephone number including
PAUSE, * or #, if any. Press PRG. Select the
storage location, from 0-9. Note that an old
number already stored in the same location will be
replaced without prior warning.
– KonfTel 100 R switched on
Dial the desired number. Press PRG. Select the
storage location, from 0-9. Note that an old
number already stored in the same location will
be replaced without prior warning.
Pause is used to enter a pause when dialling - this
may be necessary for certain exchanges and
country codes.
Retrieve speed dial number
Switch on KonfTel 100 R and wait for the dialling
tone. Retrieve a speed dial number with PRG
followed by its position. Press R to retrieve several
numbers.
Three-party calls
Call the first participant. Press R and wait for a
new dialling tone. Call the second participant.
End with R followed by 3. Three lines are now
connected in a conference call. Note that three-
party calls cannot be connected via certain
company exchanges.
9