Indicator Messages 63
Rapid blinking alter-
nately
The tray ran out of paper
while printing.
Load media into
Tray 1.
No media in the tray
specified in the printer
driver.
Load the appropriate
type of media into
Tray 1.
Media size error
If the “Auto Continue”
has been activated in the
Status Display, the sheet
already fed in, is auto-
matically ejected after a
predetermined time.
Load the appropriate
size media into Tray 1.
Waiting to print the back
of the paper during man-
ual duplex printing
Insert the paper so
that the back can be
printed, and then
press the Cancel key
(less than 5 seconds).
For details, refer to
“Manual Duplexing”
on page 37.
Off Blinking Media empty Load media into Tray
1.
Media jam Clear the jam, close
the covers, and then
continue with the print
job.
The drum cartridge or
toner cartridge is not
installed.
Install the drum car-
tridge and all toner
cartridges.
Off On Front cover or top cover
is open.
Close the front cover
and top cover.
Ready
indicator
(green)
Error
indicator
(orange)
Condition Action
UG2400W_UK.book Page 63 Thursday, November 11, 2004 12:16 PM