Solving Problems with Media Misfeeds 193
Media is
misfeeding.
Transparencies have
collected static elec-
tricity in the tray.
Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan transparencies before load-
ing them.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
Use KONICA MINOLTA-approved
media.
See “Media Specifications” on page
100.
The media roller is
dirty.
Clean the media supply roller.
For more details, refer to “Media Roll-
ers” on page 165.
Symptom Cause Solution