Tray 29-4
2Remove the dust cover from Tray 1.
Close Tray 1 and the output tray.
3Prepare Tray 2.
" Be sure to place Tray 2 on a level surface.
4Lift the printer and place it on top
of Tray 2, making sure that the
positioning pins on Tray 2 cor-
rectly fit into the holes in the bot-
tom of the printer.
5Open Tray 1 and reattach the dust cover.
6Load paper into Tray 2.
For details on loading paper, refer to “Tray 2” in “Loading Plain Paper” on
page5-18 .
7Insert Tray 2 into the printer.
8Reconnect all interface cables.