Connect the camera to the printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Slide open the USB-port cover and insert the smaller plug of the cable into the camera. Turn the camera on. The PictBridge screen will be displayed. For other printing options, see the menu navigation sec- tion.

Number of prints in the print run.

Number of copies of the displayed image.

Move the controller left and right to display the image to be printed.

Move the controller up to select the number of copies to be printed. A maximum of twenty copies can be selected. To des- elect an image for printing, move the controller down until the number of copies reaches zero.

:move :sel.

:print

Repeat the previous steps until all the

images to be printed are selected. Press

 

 

 

 

the controller to continue. If the number

 

 

of images exceeds 50, “Limit:50 images.

 

 

Reselect images to print.“ message

 

 

appears. Reduce the number of images.

No. of prints

: 7

Paper size

:Printer setup

Layout

:Printer setup

Print quality

:Printer setup

Data print

:Printer setup

:start

Printing finished.

OK

The number of prints in the print run are displayed as well as the print parameters selected with the menu. See the menu navigation section in the page 100 for more information. Press the controller to begin printing, or press the menu button to return to the PictBridge screen.

Once printing begins, the operation can be canceled by pressing the controller. The printing finished message indicates the end of the operation; turn the camera off to end the routine.

99