APPENDIX

„Troubleshooting Guide

Symptom

Possible causes

 

 

Solutions / Corrective Actions

 

Power does not

* The battery has run out.

 

* Load new or fully charged battery.

 

turn on.

* The battery is not oriented correctly.

* Load the battery in the correct direction.

 

* The battery cover is not closed properly.

* Close the battery cover correctly.

 

 

* The AC power adapter (optional)

 

* Properly connect the AC power

 

 

is disconnected.

 

 

adapter.

 

 

 

Camera suddenly

* The function of POWER OFF in the

mode

* Set the option of POWER OFF to OFF.

powers down.

has been activated.

 

 

* Turn the power back on or replace

 

 

* The battery has run out.

 

 

 

 

 

 

with new battery.

 

 

 

 

 

 

 

Image is not captured

* The camera is in the

mode.

 

* Rotate the mode dial to , P,

,

when the shutter

 

 

 

,

or

.

 

button is pressed.

* Memory is full.

 

 

* Transfer the desired files to your

 

 

 

 

 

computer and then delete unnecessary

 

 

 

 

files, or use a different memory card.

 

 

 

 

 

Flash does not fire.

* NO FLASH is selected in flash mode.

* Select a different flash mode.

 

 

* ThecameraisinBURST/AEB/ (Video)mode.

* Select [SINGLE] in the capture mode.

 

* The self-timer is set to self-timer (10+2) mode.

* Select a different self-timer mode.

 

 

 

 

 

 

Continuous shooting

* The capacity of the built-in memory

or

* Insert a new SD memory card.

 

is not possible.

SD memory card is full.

 

 

 

 

 

 

 

 

 

 

Cannot transfer files

* USB cable is not connected securely.

* Check all connections.

 

over a USB connection.

* USB driver is not installed.

 

* Install the USB driver on your computer.

 

* Camera is turned off.

 

 

* Turn on the camera.

 

 

* The camera USB setting is not in PC mode.

* Set the camera USB mode to [PC].

 

 

 

 

 

 

 

 

 

EN-72