1. Installation Precautions

1-5

Safety Notes Chapter 1
Operating Environment
The environmental requirements for operating the system are as follows:
Temperature: 10 °C to 35 °C (50 °F to 95 °F) with a fluctuation of 10 °C (18°F) per hour .
Humidity: 15% to 85% with a fluctuation of 20% per hour.
Using the Printer
To ensure the optimum performance of the printer, follow the precautions listed below:
NEVER open any Cover, or turn OFF the printer during printing.
NEVER bring any magnetized object or flammable gas or liquid close to the printer.
ALWAYS insert the Power Plug all the way into the outlet.
ALWAYS provide good ventilation when making a large number of continuous prints.
NOTE
= Locate the Printer in a Well Ventilated Room =
A minimal amount of ozone is generated during normal operation of the printer. An
unpleasant odor may, however, be created in poorly ventilated rooms during extensive
printer operations.
For a comfortable, healthy, and safe operating environment, it is recommended that the
room be well ventilated.
Care of Printer Supplies
Use the following precautions when handling the printer supplies (Imaging Cartridge, paper,
etc.).
Avoid storing the supplies in any of the following places:
• A place subject to direct sunlight. The Imaging Cartridge should not be exposed to flu-
orescent light, either.
• A hot place or near an open flame.
• A humid place.
• A dusty place.
Store paper, which has been removed from its wrapper but not loaded onto the print tray,
in a sealed plastic bag in a cool, dark place.
Only use Imaging Cartridges that are exclusively designed for use with this printer.
Keep supplies out of the reach of children.
If your hands become soiled with toner, wash them with soap and water immediately.
NOTE
Whenever the Imaging Cartridge is removed from the printer, immediately wrap it in a
heavy cloth to protect it from light.