During auto channel search, your TV searches for digital channels first. If you chose Antenna, when the digital channel search is complete, a message appears asking if you want to search for analog channels. If you do not need to search for analog channels, press MENU or EXIT stop searching for channels.
When the scan is complete, the Setup Wizard closes automatically.
Note
You can press EXIT to stop the auto channel search, but you will need to run the auto channel search again to create a channel list.
Understanding the basicsNote
Unless otherwise noted, all tasks in this section are based on using the remote control.
Selecting the video input source
To select the video input source:
1Turn on your TV, then press INPUT. The Source List opens.
Source List
TV
AV
Component
VGA
HDMI 1
HDMI 2
HDMI 3
HDMI 4
USB
Turning your TV on or off
To turn your TV on or off:
1Make sure that the power cord is connected to a power outlet.
2Press 
(power) to turn on your TV. The power indicator LED turns blue.
3Press 
(power) again to turn off your TV. Your TV enters Standby mode and the power indicator LED turns red.
Warning
When your TV is in Standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.
2Press 
or 
to highlight a video input source, then press OK/ENTER.
You can also press a direct input button to select the video input source.
•Press TV to select TV.
•Press VIDEO to select AV.
•Press COMP to select Component.
•Press HDMI once to select HDMI 1.
•Press HDMI twice to select HDMI 2.
•Press HDMI three times to select HDMI 3.
•Press HDMI four times to select HDMI 4.
Note
If Auto Input Sensing is set to On, only the jacks that have connected devices are active. The other inputs are grayed and cannot be selected.
Note
If your TV does not receive an input signal for several minutes, it automatically goes into Standby mode.
On-screen menu overview
Picture menu
PICTURE | AUDIO CHANNELS SETTINGS USB |
Picture |
|
Mode | Energy Savings |
Brightness | 50 |
Contrast | 48 |
Color | 70 |
Tint | 0 |
Sharpness | 0 |
OK | MENU PREVIOUS | EXIT EXIT |
MOVE ENTER SELECT |
Adjust settings to affect picture quality
Audio menu
PICTURE | AUDIO CHANNELS SETTINGS USB |
Audio |
|
Audyssey Dynamic Volume | Medium |
SRS TruSurround HD | Off |
Treble | 32 |
Bass | 32 |
Balance | 0 |
Digital Audio/SPDIF | PCM |
OK | MENU PREVIOUS | EXIT EXIT |
MOVE ENTER SELECT |
Adjust settings to affect sound quality
20 | www.insigniaproducts.com |