REPLACING THE CLOCK BACKUP BATTERY
The clock in this camera uses a 3V lithium battery (CR2025). If this battery is exhausted the clock settings in the camera will be lost when the main camera batteries are removed.
If this battery is exhausted the display at left appears on the data panel when camera power is switched on, or when the shutter button is lightly pressed. In this case, replace the clock backup battery as described below.
1 Remove the screw from the clock battery cover with a small Phillips screwdriver, and open it.
2 Remove the old battery.
• Push the battery out of the recess slightly (diagram at top left) and remove it (diagram at bottom left).
108