CLEANING THE LENS IN THE RELAY OPTICAL SYSTEM

If dirt appears on the image on the screen, clean the lens in the relay optical system with the following procedure.

•The function of this camera is used to clean the lens in the relay optical system. It is not to be used for extra-long exposures.

•Use of the function requires considerable power from the battery, and it is therefore recommended that the AC adaptor be used with the camera when cleaning the lens in the relay optical system.

1 Remove the lens.

2 Press in the card removal lever and remove the compact flash card.

• The function cannot be set in step [4] unless the card is removed from the camera.

3 With the Control dial lock button pushed in the direction, turn the Control dial to the left to the

REC or

position.

110