Konica Minolta Vectis 300 LOADING FILM - CONT’D, 4. Press the film-chamberdoor closed until it clicks, 3. Open the film-chamberdoor and insert the cassette into the film chamber

LOADING FILM - CONT’D

2. Turn the camera upside down, then turn the film-chamber release in the direction indicated. The film-chamber door will open partway.

3. Open the film-chamber door and insert the cassette into the film chamber.

18

4. Press the film-chamber door closed until it clicks.

•The camera will display the cassette mark and the film’s ISO in the data panel, then advance the film to the first frame. The frame counter will display the number of frames remaining on the roll.

•Do not load film without an operational battery in the camera.

•Do not hold or turn the release when closing the door. If the release is turned, the film will not load properly; the cassette’s VEI

indicator will change to and the film cannot be used.

Continued on following page. 19