Konica Minolta Z10 manual 56

Custom White Balance

Custom white-balance allows the camera to be calibrated to a specific lighting condition. The setting can be used repeatedly until reset. Custom white balance is especially useful with mixed-lighting or when critical control over color is needed. The object used to make a calibration must be neutral. A blank piece of white paper is an ideal surface and can easily be carried in a camera bag.

To calibrate the camera, select custom setup
(Cust.set) from the white balance option in section 1
	Drive mode
of the movie, and P, A, S, and M exposure-mode
	Image size			Cust.set
menus (p. 44); the custom white-balance calibration
screen opens.	Quality			CustRecall
	White balance			Auto
Fill the image area with a white object; the object	Key func.			Preset
does not need to be in focus. Press the central
button of the controller to make the calibration or
press the menu button to cancel the routine.
The live view shows the effect of the new white
balance setting. The custom setting will remain in
effect until another calibration is made or the white-
balance setting is changed.			:enter
If the custom white-balance setting is required again, select
custom recall from the white-balance option of the menu;
the last custom white-balance setting will be applied to the		Drive mode
camera. The same custom white-balance setting is made		Image size			Cust.set
and accessed from the movie, P, A, S, and M exposure		Quality			CustRecall
modes.		White balance			Auto
			Key func.		Preset

56ADVANCED RECORDING