Pictures are not sharp.

Focus signal is red.

Subject is too close.

The camera is in macro mode.

A special situation is preventing the autofocus system from focusing (p. 25).

Make sure the subject is within the autofocus range (p. 24) or use the macro mode (p. 35).

Cancel the macro mode setting (p. 35).

Use the focus-lock function to focus on an object at the same distance as the subject (p. 24) or use manual focus (p. 57).

Pictures are Slow shutter speeds

taken indoors result in blurred images

or in low-lightwhen the camera is situations with-

Use a tripod, change the camera sensitivity to a higher setting (p. 62), or use the flash (p.

out flash.

While using

hand-held.

26).

Move closer to the subject or

flash, the pic- The subject is beyond the flash

tures are too range (p. 62). dark.

change the camera sensitivity to a higher setting (p. 62).

The camera temperature rises with extended periods of use. Care should be taken to avoid burns when handling the camera, batteries, or memory card.

If the camera does not function normally or the system error message appears, turn the camera off, remove and reinsert the batteries, or unplug and reconnect the AC adapter. If the camera has become hot with extended use, wait for it to cool before removing or disconnecting the power sup- ply. Always turn the camera off using the main switch otherwise the memory card may be damaged and the camera reset.

This manual contains information on products and accessories available at the time of printing. To obtain compatibility information on products not contained in this manual, contact a Konica Minolta service facility.

115