Viewing images on a television

It is possible to view camera images on your television. The camera has a video-out terminal to make the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan- dards. The video-output setting can be checked and set in section 4 of the setup menu (p. 98).

1. Turn off the television and the camera.

2. Open the terminal cover and insert the small plug of the AV cable into the camera’s AV-out terminal. The arrow on the plug should face the back of the camera.

SETUP MENU

The setup menu is used to control the camera’s functions and operation. The navigating the setup menu section covers the operation of the menu. The section is followed by detailed descriptions of the settings.

Opening the setup menu

The setup menu is opened from the other menus. It can be accessed from any of the recording or playback menus.

3. Plug the other end of the AV cable into the video and audio input terminals on the television. The yellow plug is for the video output. The white plug is for the monaural audio output.

4. Turn the television on.

5. Change the television to the video channel.

6. Turn the camera’s mode dial to the playback position and turn on the camera. The camera’s monitors will not activate when the camera is attached to a television. The playback-mode display will be visible on the television screen.

7. View images as described in the playback section.

Drive m

 

 

Image

Drive mode

Single

Quality

Image size

2816x2112

Auto D

Quality

Standard

Anti-sh

Auto DSP

On

 

 

Anti-shake

Disp. + Exp.

 

:enter

 

LCDbrightness

–

Power save

1 min.

Inst.Playback

Off

Language

English

Lens acc.

None

Use the right key of the controller to highlight setup tab at the top of the menu.

Press the central button of the controller to open the setup menu.

Reverse the procedure to return to the original menu. Pressing the menu button closes the menu and returns to the recording or playback modes.

Setup menu

86 Advanced playback

87