PictBridge

Confirm the transfer-mode option in section 4 of the setup menu is set to PictBridge. Connect the camera to a PictBridge compatible printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Open the AV out/ USB port cover and insert the smaller plug of the cable into the camera. Turn the camera on; the PictBridge screen is displayed automatically.

No. of prints:

7

Print size:

Printer setup

Layout:

Printer setup

Print quality:

Printer setup

Data print:

Printer setup

:start

 

The number of prints in the print run are displayed as well as the print parameters selected with the menu. See the menu navigation section for more information (p. 114). Press the central button of the controller to begin printing, or press the menu button to return to the PictBridge screen. A maximum number of fifty images can be printed.

Individual still images can be selected for printing on the PictBridge screen. For other printing options, see the menu navigation section on page 114.

The information (i+) button switches between the single frame and

index playback formats on the PictBridge screen. Enlarged playback, activated with the zoom lever, can be used to examine image files on the screen.

Total number of prints

Number of copies

Once printing begins, the operation can be canceled by pressing the

Printing finished.

 

center of the controller. When printing run is finished, a message indi-

OK

cates the end of the operation; press the center of the controller and turn

 

the camera off to end the routine.

 

Notes on printing errors

If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged battery or the optional AC adapter.

 

 

 

:move

:sel.

:print

 

 

 

Use the left/right keys of the controller to display the image to be printed.

Press the up key to select the number of copies to be printed. To deselect an image for printing, press the down key until the number of copies reaches zero.

If a minor problem occurs during printing, such as the paper runs out, follow the procedure recommended for the printer; no action is required for the camera. If a major printer error occurs, press the center of the controller to end the routine. Refer to the printer manual for the correct procedure for the printer problem. Check the printer settings before starting again and deselect the images that were printed.

Printing Notes

Always confirm printer and camera settings before a print run to minimize errors. Setting print parameters with the PictBridge menu (p. 114) avoids having to set up the printer for each printing session, especially if the printer is used for multiple purposes.

Repeat the previous steps until all the images to be printed are selected. Press the central button of the controller to continue.

112 Data-transfer mode

113