8
BANK/PROGRAM SELECT SECTION
6.1 BANK UP/DOWN switches
In Program Select mode (p.15), pressing Bank Up will increment the bank, and
pressing Bank Down will decrement the bank.
In Program Select mode, you can press and hold the Bank Up switch which
turns on Individual mode (the LED located at the upper left of the switch will
light green). In Individual mode, you can use the program select switches to
turn the Pre-Effect, Drive/Amp model, Modulation effect, and Delay effect on/
off individually. You can also use the Bank Down switch to turn the Reverb
effect on/off.
6.2 Program Select switches, Program LEDs
Use these switches to select programs. The program LED located at the upper
left of each switch will light red to indicate your selection. In Individual mode,
you can use these switches to turn the Pre-Effect, Drive/Amp model, Modula-
tion effect, and Delay effect on (LED lit green) or off individually.
EFFECT CONTROL SECTION