Korg Ax3000b - page 15

IntroductionPanel TourSetupPlayingCreating

and Storing

Effect TypePedals

ESS

Index

MIDI/DIGITAL

Factory

settings

Trouble-

shooting

Spec. TunerAppendix

7.1 CONTROL switch

This switch controls an effect. For each program, you can assign what effect

parameter this switch will control. For details, refer to “Control switch settings”

on p.44.

7.2 EXP (Expression) pedal

This controls volume, wah, or another effect parameter. For each program, you

can assign just what this pedal will control (p.41). When using ESS, manual

control of the sequence speed or step is assigned to this pedal. By advancing

this pedal forward to press the switch that’s mounted under it, you can turn the

expression pedal or the effect being controlled by ESS on/off. (This switching

operation is not available if the EXP pedal is controlling the volume.)

ESS/PEDAL INDICATOR/TUNER DISPLAY

8.1 ESS/Pedal indicator/Tuner display

When you’re using ESS, this indicates the total number of steps (LED: green)

and the current step (LED: red). When you’re using the expression pedal, this

indicates the current position of the pedal (LED: red). When the Tuner is oper-

ating, this functions as a tuning meter (LED: red or green).

NOTE: What happens when you change programs will depend on the target that’s

assigned to the expression pedal, as follows.

If the expression pedal is assigned to VOLUME, DELAY INPUT, or REVERB

INPUT, or if it is assigned to the same target as in the previous program, the pedal

position will be valid immediately after the program change, and the pedal indicator

will light.

In other cases, the value speciﬁed within the program will be valid immediately

after the program change, and the pedal indicator will be dark until you move the

pedal.